@air
2025-04-15

4. What is the formula for calculating the exhaust volume?

A. Cylinder volume × speed × number of cylinders
B. Gas production × efficiency coefficient
C. Theoretical exhaust volume ÷ temperature correction coefficient
D. Standard state gas production × altitude correction factor

Answer: A
parsing: The exhaust volume is determined by cylinder volume, speed and number of cylinders.

Welcome!

Related Articles:
@air
2025-04-15

14. The nominal displacement of an air compressor is 20m³/min, and the measured gas production is 16.8 m ³/min. The possible reasons are not included?

A. An altitude of 1500 meters causes intake pressure loss B. After-treatment equipment pressure loss 6% C. The capacity of the air storage tank is too large D. The ambient temperature is too high Answer: C Analysis: Insufficient capacity of the gas storage tank is a problem. Too large will not affect the gas production…

@ggao
2025-03-12

Question: What are the requirements for the installation location of the compressor?

Answer: It should be installed in a cool, dry place with adequate ventilation and away from sources of heat and moisture.

@ggao
2025-03-12

How is the “oil-free water lubrication” technology applied in this compressor?

Answer: The compressor uses water instead of oil to lubricate the screw elements, eliminating the risk of oil contamination in the compressed air.

@air
2025-04-15

What is the usual price range for scroll air compressors?

A. A few hundred yuan to several thousand yuan B. Thousands of yuan to tens of thousands of yuan C. Tens of thousands to hundreds of thousands of yuan D. Hundreds of thousands of yuan to several million yuan Answer: B. Thousands to tens of thousands of yuan

@ggao
2025-03-12

What maintenance work is required for the GWL Series compressor on a regular basis?

Answer: Regular replacement of water filters, air filters, and other consumables is required, as well as inspection of the cooling system, lubrication system, and other components.