@air
2025-04-15

5. The range of flow loss caused by leakage in rotor clearance of screw machines is usually?

A. 1-3%
B. 8-12%
C. 15-25%
D. 30-40%

Answer: B
parsing: The gap leakage loss of screw machines is 8-12%, and the reciprocating gap volume loss is even higher.

Welcome!

Related Articles:
@air
2025-04-15

What is the usual manufacturing cost of oilless air compressors?

A. Higher B. Lower C. Same as oil injection air compressor D. The answer cannot be determined: A Analysis: The manufacturing cost of oil-free air compressors is usually high, and the initial investment is large, but the long-term maintenance cost is low.

@air
2025-04-15

10. When selecting equipment, the comprehensive efficiency coefficient is usually taken?

A. 0.5-0.6 B. 0.7-0.85 C. 0.9-1.0 D. 1.1-1.2 Answer: B Analysis: When selecting the model, it needs to be multiplied by an efficiency factor of 0.7-0.85.

@ggao
2025-03-12

Does the GWL Series compressor generate radial and axial forces during operation?

Answer: No, the GWL Series compressor has a reasonable structure and only generates rotational force during operation, without radial and axial forces.

@air
2025-04-15

What does the air compressor product line include?

A. There are oil screw air compressors, oil-free screw machines, centrifuges, vacuum pumps, etc. B. Air compressors used in homes and air compressors used in commercial places C. Air compressors for the oil and natural gas industry, air compressors for the construction industry D. Manufacturing air compressors,…

@air
2025-04-15

8. For every 50 meters increase in the pipeline, the pressure drop increases by about?

A. 0.05 bar B. 0.1 bar C. 0.2 bar D. 0.5 Bar Answer: B Analysis: The pressure drop per 50 meters of pipeline increases by 0.1 bar, and the flow loss is about 2%.